AF BRICK was created to be a simple answer to complex problems. A single product that can be cut to size and compressible, to seal crossings of very different types and with important points of differentiation compared to other similar products.

With a sealing depth of only 150 mm, AF Brick can be installed on most substrates on site without the need for local intervention to increase the thickness of the substrate.

The simplicity of installation is at the heart of the system's flexibility. If it is necessary to re-interface for maintenance purposes or for a change in the configuration of the installations, it will be sufficient to temporarily remove some of the bricks and reinsert them later.

AF Brick has recently obtained ETA 21/0580 certification for the sealing of mechanical and electrical installations. It has been tested and evaluated for the following environmental conditions of use Type Y1 (for a service life of 25 years).