AF Sleeve B3
Fireproof sleeve for corrugated pipes
AF SLEEVE B3 is an intumescent sleeve certified under EN 1366-3 for EI 180 sealing of corrugated combustible pipe penetrations and openings left by the extraction of formwork bolts.
Weight: | 0,09 kg /M |
Price: | €9,80 /M |
Choose the quantity (M)

Direct Application
- Electrical cables in corrugated pipes;
- Formwork holes.

Certifications
- Class EI 180 (EN 1366-3) rigid floor;
- Class EI 180 (EN 1366-3) rigid wall;
- Class EI 120 (EN 1366-3) plasterboard wall;
- Class EI 120 (EN 1366-3) self-supporting wall;
- Class EI 120 (EN 1366-3) sandwich wall;
- Class EI 120 (EN 1366-3)
independent false-ceiling.

Packaging and Storage
10 m rolls, 30x2 mm section.
Unlimited under normal storage conditions.
Unlimited under normal storage conditions.

Specification
Supply and application of
AF SLEEVE B3
intumescent sleeve, which has an expansive capacity of more than 20 times its initial volume, for EI 60/120/180 protection of combustible pipes containing electrical cables and sealing of formwork holes. The system is certified for use in combination with semi-rigid
AF PANEL rock wool panels.

Application Method
Electrical cables in corrugated pipes
1. Insert AF SLEEVE B3 around the combustible pipe at the penetration;
2. Seal the outer space by applying AF PANEL panels glued and smoothed
with AF SEAL W sealant.
Formwork holes
1. Wrap the AF SLEEVE B3 around until it reaches the diameter of the opening
to be sealed;
2. Insert the "roll" inside the opening to be sealed.
1. Insert AF SLEEVE B3 around the combustible pipe at the penetration;
2. Seal the outer space by applying AF PANEL panels glued and smoothed
with AF SEAL W sealant.
Formwork holes
1. Wrap the AF SLEEVE B3 around until it reaches the diameter of the opening
to be sealed;
2. Insert the "roll" inside the opening to be sealed.

Reason to choose AF Sleeve B3
very slim profile of the strip;
non-invasive from an aesthetic point of view;
clean application;
also used for small holes up to 38 mm;
no waste.
SOLUZIONI
RELATED PRODUCTS
AF Panel
Do you have a special need? We can offer you the Solution that best suits you!
If you did not find what you were looking for and/or if you need further information, do not hesitate to call us at +39 0298879353, or fill in the form below